1550nm Fiber Optical Amplifier EDFA:
Total output power :23dBm(200mW), 4output ports,16dbm/port, SC/APC output, dual power supply,19"1U

Introduction

This is 1550nm Erbium Doped Fiber Amplifier (standard) adopts 980nm or 1480nm high linearity, optical isolation, the DFB, thermoelectric cooling DFB laser produced by JDS-U, Fujitsu, Nortel, Lucent, Fitel and other world-renowned semiconductor companies as the pumping source.
In the interior of the machine is equipped with the output optical power stability circuit and laser thermoelectric cooling device, temperature stability control circuit to ensure optimal machine performance and long-life laser stability. The microprocessor software monitor the laser’s working state, the VFD screen displays the operating parameters. Once the laser operating parameters deviate from the permissible range set by the software, micro-processing will automatically turn off laser power, red light goes on to warn, digital panel prompts cause of troubles

Features
High quality: The former-class pump commonly uses 980nm, after-class pump use 1480nm, power is legitimately optimized by software to minimize the NF of the EDFA, could be comparable with the so-called low-power optical amplifier. It can make the system to obtain superior CNR.
Reliability: 19 “1U standard rack, built-in high-performance switching power supply, it can work at 85~265Vac City Network Voltage, As well as an optional DC48V power supply (reservations required); Chassis cooling automatic temperature control. Mechanical cooler (heat sink) on one side of the chassis helps to make heat dispersion thus to protect the pump laser.
Intuitive: Equipped with microprocessor monitors the working state of the laser, and the panel LCD window displays the operating parameters.
Network type: Select all piece status monitoring transponder guarantee to meet the national standard and be compatible with the SCTE HMS standard, it enables network management monitoring capabilities.
Technical Specification

Items Specification
Operating wavelength range 1540~1560nm
Optical input power -10~+10 dBm
Nominal optical input power 3dBm
Working pump quantity 1~3
Saturated output power 13~27dBm
Number of output ports 1~8 (customer specify)
Noise Figure (NF) <5.0dB (+0 dBm input @1550nm)
Optical output power stability <±0.5 dB
Polarization Sensitivity <0.2 dB
Polarization dependence gain <0.5 dB

Product series

Model 1550nm Standard Erbium Doped Fiber Amplifier
Output power @ +3dBm input
EDFA-1550S-13 Saturated output power≥13dBm (20mW)
EDFA-1550S-14 Saturated output power≥14dBm(25mW)
EDFA-1550S-15 Saturated output power≥15dBm(32mW)
EDFA-1550S-16 Saturated output power≥16dBm(40mW)
EDFA-1550S-17 Saturated output power≥17dBm(50mW)
EDFA-1550S-18 Saturated output power≥18dBm(63mW)
EDFA-1550S-19 Saturated output power≥19dBm(80mW)
EDFA-1550S-20 Saturated output power≥20dBm(100mW)
EDFA-1550S-21 Saturated output power≥21dBm(125mW)