space-saving clock system in closed aluminium profile housing for easy and horizontal DIN rail mounting according to DIN EN 60715 TH35
important information for implementing and about operating status available via status-LEDs at the front panel (if WebGUI access is not available)
simple, complete and safe operation and parameterisation (password protection and activatable https protocol) via password-protected WebGUI (optional SSH/Telnet)
22-channel GPS receiver for L1 frequency (1,575.42 MHz) integrated
one integrated timeserver module per default with:
2 ethernet interfaces 10/100/1000 Mbit/s autosensing
Network Time Protocol (NTP) version 4 (RFC5905)
improved security ensured by
symmetric keys
autokey
access restriction
deactivation of non-used network protocols
cost-efficient extension of the base system with additional output modules ex works (modular order concept) possible
synchronization status output via optical coupler
redundant multiple validation of the synchronization signal for an error-free and leap-free signal evaluation
SyncOFF Timer (reception failure bypassing) for accurate operation even based on difficult reception conditions
high freewheel accuracy provided by GPS supported regulation of the internal quartz basis, various quartz versions available
تایم سرور GPS کد 8030NTS
Compact - space-saving - highly precise - maintenance free!
This is the hopf network timeserver 8030NTS/GPS, easily explained.
With its up to 2 isolated and mutually independent network timeserver modules and up to 4 ethernet interfaces the network timeserver 8030NTS/GPS for DIN rail mounting is the ideal solution ensuring enhanced security for business critical and even most demanding applications!
Base system 8030NTS/GPS is equipped with 1 network timeserver module by default:
2 ethernet interfaces 10/100/1000 Mbit/s autosensing
Network Time Protocol (NTP) Version 4 (RFC5905)
To ensure enhanced security and availability in redundant networks one isolated, independent network timeserver module 8030NTS/M may be integrated in the base system at time of purchase.
Optionally the network timeserver 8030NTS/GPS may also be equipped with numerous time synchronization modules for the output of:
IRIG-B (modulated / unmodulated)
DCF77 (modulated / unmodulated)
Cyclic Pulses (PPS, PPM, etc.)
Serial time datagram
The mentioned output modules are available in various electrical signal output versions as well as modules for fiber optic output.
You may also decide on purchase which power supply to be configured for you:
Power supply - standard delivery with: Power supply - optionally available with:
100 - 240V AC (50/60 Hz)
110 - 250V DC
24V DC (18 - 36V DC)
48V DC (36 - 76V DC)
Even more flexibility required?!
Activate additional functions per network timeserver module on site after purchase of the appliance by entering a serial number-dependent activation key.
Alarming
SNMPv2c / SNMPv3 (MIB II, hopf Private Enterprise MIB, SNMP traps)
E-Mail Notification
SYSLOG
Routing: for configuring static routes based on special network configuration requirements
VLAN support according to IEEE 802.1q
Port Aggregation (NIC Bonding/Teaming) with support of IEEE 802.3ad trunks
Parallel Redundancy Protocol (PRP) according to IEC 62439-3
Precision Time Protocol (PTP) according to IEEE 1588-2008
IEEE Standard Profile for Use of IEEE 1588 Precision Time Protocol in Power System Applications (Power Profile) according to IEEE Std C37.238-2011
SINEC H1 time datagram
نظرات